探访秦岭光头山羚牛世界

光头山在秦岭山中是一座极普通的山脉.其峰顶也才2903米.这与秦岭主峰3767米的太白山逊色多了,简直就是小子辈了。但由于她地处秦岭南坡苍茫的深山之中,交通闭塞.周围又有多个自然保护区相簇拥,因而她躲过了现代人一次次刀斧的蹂躏.迄今还保持着她那应有原始与清纯,虽然我一次次走近她.解读她.她依然令我无尽的痴迷和向往。     

土壤中砷的原子荧光法测定

将土壤粉末均匀稳定地悬浮于0.15％～0.2％琼脂溶胶中,采用悬浮样品直接进样,氢化物发生—非色散原子荧光法,测定其砷含量。以柠檬酸—NaOH缓冲液控制试样pH4.7,测定As~(3+);以HCl、KI和抗坏血酸还原As~(5+)为As~(3+),测定总砷量;用差减法求得As~(5+)含量。方法应用于测定不同类型土壤时,相对标准偏差为1％～6％,回收率为85％～106％。     

A Simulation of Temporal and Spatial Variations in Carbon at Landscape Level: A Case Study for Lake Abitibi Model Forest in Ontario,Canada

Using a case study of the Lake Abitibi Model Forest (LAMF), this study aims to assess the temporal and spatial variability in carbon storage during 1990–2000, and to present a comprehensive estimation of the carbon budget for LAMF's ecosystems. As well, it provided the information needed by local forest managers to develop ecological and carbon-based indicators and monitor the sustainability of forest ecosystems. Temporal and spatial carbon dynamics were simulated at the landscape level using ecosystem model TRIPLEX1.0 and Geographical Information System (GIS). The simulated net primary productivity (NPP) and carbon storage in forest biomass and soil were compared with field data and results from other studies for Canada's boreal forests. The results show that simulated NPP ranged from 3.26 to 3.34 tC ha⁻¹ yr⁻¹ in the 1990s and was consistent with the range measured during the Boreal Ecosystem-Atmosphere Studies (BOREAS) in central Canada. Modeled NPP was also compared with the estimation from remote sensing data. The density of total above-and belowground biomass was 125.3, 111.8, and 106.5 tC ha⁻¹ for black spruce, trembling aspen, and jack pine in the LAMF ecosystem, respectively. The total carbon density of forested land was estimated at 154.4 tC ha⁻¹ with the proportion of 4:6 for total biomass and soil. The analysis of net carbon balance of ecosystem suggested that the LAMF forest ecosystem was acting as a carbon sink with an allowable harvest in the 1990s.     

超临界二氧化碳流体萃取土壤中有机污染物的研究进展

就近年来人们利用超临界二氧化碳流体对有机污染物污染的土壤所做的研究工作以及所取得的成果进行了总结。     

导流板在生产性氧化沟中的应用

导流板是曝气转盘的附件。通过测试导流板设置前后对氧化沟流速分布和曝气机充氧能力的影响，分析了导流板在实际氧化沟中的应用效果，测试结果表明：导流板的设置提高了氧的转移效率，使转盘的充氧能力得以增加，改善氧化沟上部、底部流速分布。同时设置上下游导流板比只设置下游导流板效果更加明显。     

稠联污水生化处理技术研究

河南油田在可行性研究的基础上，开展了生化技术处理稠油联合站污水的现场实验研究。结果表明，采用生化技术处理后的外排水主要监测指标COD为70～100mg／L，油含量为4～6mg／L，悬浮物35～45mg／L，其它指标达到了有关排放标准。     

长庆油田水处理新技术研究

长庆油房庄油田水经过处理后仍具有较高的矿化度、较多的悬浮物及残留油,同时其SRB严重超标。现场处理水质不稳定,在进行回注时与地层的配伍性较差。针对这些情况,研究了一种新型的水处理工艺技术。对成垢离子调整剂、水质净化剂和成垢离子钝化剂进行了筛选,并对含油污水的成垢离子含量及比例进行了调整。运用这种技术,使油房庄油田水经处理后达到回注水的标准,且提高了与地层的配伍性。同时提出了新型水处理技术的工艺流程。     

Development and Testing of 2D Finite Difference Model in Open Channels

This study develops a depth-averaged two-dimensional (2D) numerical model using a finite difference method (FDM) on a staggered grid. The governing equations were solved using the Marker and Cell method that was developed at the Los Alamos laboratories by Harlow and Welch in 1965. In the paper, an explicit FDM was used to solve the governing equations. A first-order approximation was used for the temporal derivative. Second-order central difference approximations were used for space discretization. The time step is limited by the Courant–Friedrichs–Lewy (CFL) condition. The time step used in this study depends on the grid spacing and velocity components in the x- and y-directions. The study is divided into two steps: the first step is to develop a depth-averaged 2D numerical model to simulate the flow process. The second constructs a module to calculate the bed load transport and simulate the river morphology in the areas that have steep slopes, torrents, and mountain rivers. Developed model was applied to the artificial channel and a flood event in the Asungjun River section of the mountainous Yangyang Namdae River (South Korea). General simulation results showed that the developed model was in good agreement with the observed data.     

Facile Preparation of Chitosan Films for High Performance Removal of Reactive Blue 19 Dye from Aqueous Solution

This study aimed at finding effective strategies for high-performance removal of reactive blue 19 (RB19) dye from aqueous solution. Chitosan (CS) films had been prepared by using solvent casting with mild drying for this purpose. The CS films were characterized by X-ray diffraction, field-emission scanning electron microscopy, and Fourier transform infrared (FTIR) spectroscopy. The performance of RB19 removal using CS were evaluated by varying contact time, solution pH, initial dye concentration, and adsorbent dosage. Adsorption isotherms, kinetics, and desorption were investigated by batch experiments. Results showed that CS films exhibited the optimal adsorption performance for RB19 removal and high maximum adsorption capacities of RB19, which were 799 and 822.4 mg g^?1 at 20 and 40 °C, respectively. Adsorption kinetic data were well described by the pseudo-second-order kinetic model. FTIR analyses further indicated that interactions between RB19 and the CS film occurred during adsorption. The CS films also exhibited satisfactory desorption of RB19 at about 80 % after 30 min of desorption at pH 11. Our study demonstrated that the CS films can be easily prepared and applied for effective removal of RB19 in treatment of wastewater.